AP Buck / APB-905020

Allin-1 Personal Air Sampler Single Pack Kit (Flow Rate: 5 to 600 cc/min.)

Allin –1 Single Pack Kit, 230V c/w Allin-1 pump with single pack NiMH battery, standard 230VAC battery charger, Luer hose adapter, shirt/hose clip, 3 feet of vinyl hose, operating manual, adjustable Universal low flow holder for sorbent tube sampling and non adjustable tube holder.

The BUCK Allin series is a personal air sampler suitable for use in location where flammable gases, vapors, dust, fibers or flyings are present. It has steel fiber filled housing for RFI/EMI shielding, exclusive electronic circuit board for constant flow control, an LCD display with 2 lines of 16 characters, a single diaphragm pump mechanism, and a rechargeable NiMH battery pack.

The purpose of this pump is to draw air contaminants in through a sampling media such as sorbent tubes, bubble impingers, long duration color detector tubes; to gauge personnel exposure to gases, vapors, particulates, aerosols, etc.

No tools are required to operate this pump and a password protected keypad locking system provides uninterrupted operation. The main display allows quick selection to RUN (for sampling) or MENU (to reset pumps data).

Features:

UL 913 and CAN/CSA-C22.2 Intrinsically safe certified: Suitable for use in Class I, II, III, Div 1 Groups A-G, T3 Hazardous locations.
High back pressure compensation, up to 36” of w.c.@300cc/min
Flow compensation for filter plugging and battery voltage.
''Auto-restart'' within one minute of a flow fault.
Includes single pack battery and run time could be extended with the use of option triple pack.
Battery pack rechargeable while attached or separately
Compact, rugged, and quiet.
Stainless steel belt clip with built-in tripod connector.
Key pad lock system.

Technical Specifications

Flow Range: 0.1-0.6 LPM (100-600 cc/min) 5 - 99 cc/min With Universal Low Flow Holder

Compensation Range:

600 cc/min up to 10” water back pressure
500 cc/min up to 25” water back pressure
300 cc/min up to 36” water back pressure
200 cc/min up to 25” water back pressure
100 cc/min up to 10” water back pressure
Accuracy: ± 5% of Compensation Range

Run Time (hrs) at different backpressure and flow rate (cc/min)

	Backpressure (inches of water)
Flow Rate	3''	5''	10''	15''	20''	30''	36''
100	24hr	23hr	21hr
200	20hr	19hr	18hr	16hr	15hr	14hr
300	19hr	18hr	16hr	14hr	13hr	11hr	10hr
400	15hr	14hr	12hr	11hr	10hr	9hr
500	13hr	10hr	9hr	9hr	7hr
600	8hr	6hr

Low Flow using Universal Low Flow Holder 5 to 99cc/min 1-8 hours

Data Storage	Flow rate, elapsed clock time, accumulated
Allin Plus Only	volume, temperature, DP and any Flow Faults are logged in the memory for download to PC
Display	Backlit LCD with 2 lines of 16 Characters
Normal Operation	Battery Level, Flow Rate, Elapsed Time, Volume Collected, Timer & DP.
Flow Fault Displays	Flow Fault, or Filter Off
Power Supply	Single Pack, NiMH Batteries: 4.8V, 2.15 Ah Triple Pack, NiMH Batteries 4.8V, 6.45 Ah
Charger Type	Standard Wall Charger
Standard Charger Input Voltage	110 VAC - 240 VAC
Approvals	UL913 and CAN/CSA-C22.2 Intrinsically safe certified. Suitable for use in Class I, II, III Div 1Groups A-G,T3 Hazardous locations.
Temperature	Operating 32°F to 113°F (0°C to 45°C) Storage 32°F to 113°F (0°C to 45°C) Charging 50°F to 104°F (10°C to 40°C)
Case	Polycarbonate steel fiber filled, RFI/EMI-shielded
Size	4.5”H x 4”W x 2”D (11.4 cm H x 10.2 cm W x 5 cm D)