3 / 8

Allin Plus-1 Personal Air Sampler Single Pack Kit

AP Buck / APB-905120

Allin Plus-1 Personal Air Sampler Single Pack Kit (Flow Rate: 5 to 600 cc/min.)

The BUCK Allin Plus 1 series is a personal air sampler suitable for use in location where flammable gases, vapors, dust, fibers or flyings

are present. It has steel fiber filled housing for RFI/EMI shielding, exclusive electronic circuit board for constant flow control, an LCD

display with 2 lines of 16 characters, a single diaphragm pump mechanism, and a rechargeable NiMH battery pack.

The purpose of this pump is to draw air contaminants in through a sampling media such as sorbent tubes, bubble impingers, long duration

color detector tubes; to gauge personnel exposure to gases, vapors, particulates, aerosols, etc.

No tools are required to operate this pump and a password protected keypad locking system provides uninterrupted operation. The

main display allows quick selection to RUN (for sampling) or MENU (to reset pumps data).

**Allin Plus models include data logging, programmable feature which allows the pump for unattended Start/Stop operation. Temperature

and Barometric Pressure compensation in STP mode. The PC link capability lets you download the sampling data into a PC with Windows

XP/ Windows 7 operating system using the RS232 COM port and the Buck PC link cable.

· UL 913 and CAN/CSA-C22.2 Intrinsically safe certified: Suitable for use in Class I, II, III, Div 1 Groups A-G, T3 Hazardous locations.

· **Allin Plus models capable of Data logging and can be programmed for multiple Start/ Stop and Duration Sampling.

· **Temperature and Barometric Pressure Compensation available in the Allin Plus models.

· High back pressure compensation, up to 36” of w.c.@300cc/min

· Flow compensation for filter plugging and battery voltage.

· “Auto-restart” within one minute of a flow fault.

· Includes single pack battery and run time could be extended with the use of optional triple pack.

· Battery pack rechargeable while attached or separately

· Compact, rugged, and quiet.

· Stainless steel belt clip with built-in tripod connector.

· Key pad lock system.

Flow Range: 0.1-0.6 LPM (100-600 cc/min)

5 - 99 cc/min With Universal Low Flow Holder

600 cc/min up to 10” water back pressure

500 cc/min up to 25” water back pressure

300 cc/min up to 36” water back pressure

200 cc/min up to 25” water back pressure

100 cc/min up to 10” water back pressure

Accuracy: ± 5% of Compensation Range

Run Time (hrs) at different backpressure and flow rate (cc/min)

	Backpressure (inches of water)
Flow Rate	3”	5”	10”	15”	20”	30”	36”
100	24hr	23hr	21hr
200	20hr	19hr	18hr	16hr	15hr	14hr
300	19hr	18hr	16hr	14hr	13hr	11hr	10hr
400	15hr	14hr	12hr	11hr	10hr	9hr
500	13hr	10hr	9hr	9hr	7hr
600	9hr	8hr	6hr

Low Flow using Universal Low Flow Holder 5 to 99cc/min 1-8 hours

Data Storage	Flow rate, elapsed clock time, accumulated
Allin Plus Only	volume, temperature, DP and any Flow Faults are logged in the memory for download to PC
Display	Backlit LCD with 2 lines of 16 Characters
Normal Operation	Battery Level, Flow Rate, Elapsed Time, Volume Collected, Timer & DP.
Flow Fault Displays	Flow Fault, or Filter Off
Power Supply	Single Pack, NiMH Batteries: 4.8V, 2.15 Ah Triple Pack, NiMH Batteries 4.8V, 6.45 Ah
Charger Type	Standard Wall Charger
Standard Charger Input Voltage	110 VAC - 240 VAC
Approvals	UL913 and CAN/CSA-C22.2 Intrinsically safe certified. Suitable for use in Class I, II, III Div 1Groups A-G,T3 Hazardous locations.
Temperature	Operating 32°F to 113°F (0°C to 45°C) Storage 32°F to 113°F (0°C to 45°C) Charging 50°F to 104°F (10°C to 40°C)
Case	Polycarbonate steel fiber filled, RFI/EMI-shielded
Size	4.5”H x 4”W x 2”D (11.4 cm H x 10.2 cm W x 5 cm D)