AP Buck / APB-905220

Allin -5 Personal Air Sampler Single Pack Kit (Flow Rate: 5 to 5000 cc/min.)

Allin -5 Single Pack kit, 230V c/w Allin -5 pump with single pack NiMH battery, standard 120V or 240V AC battery charger, Luer hose adapter, shirt/hose clip, 3 feet of vinyl hose and operating manual. Universal low flow holder for sorbent tubes & PC link software and cable sold seperately.

The BUCK Allin 5 series is a personal air sampler suitable for use in location where flammable gases, vapors, dust, fibers or fly-ings are present. It has steel fiber filled housing for RFI/EMI shielding, exclusive electronic circuit board for constant flow control, an LCD display with 2 lines of 16 characters, a single diaphragm pump mech-anism, and a rechargeable NiMH battery pack.

The purpose of this pump is to draw air contaminants in through a sampling media such as 25 and 37mm filter cassettes, bubble im-pingers, long-duration color detector tubes; to gauge personnel expo-sure to gases, vapors, particulates, aerosols, etc.

No tools are required to operate this pump and a password pro-tected keypad locking system provides uninterrupted operation. The main display allows quick selection to RUN (for sampling) or MENU (to reset pumps data). Other features include elapsed time, flow rate, and accumulated volume.

Features:

• UL 913 and CAN/CSA-C22.2 Intrinsically safe certified: Suitable for use in Class I, II, III, Div 1 Groups A-G, T3 Hazardous locations.

• Temperature and Barometric Pressure Compensated flow available in the Allin Plus models only.**

• Runs 14 hours @ 2.0 LPM (37 mm 0.8μ filter)

• High back pressure compensation, up to 50” of w.c.@2LPM

• Accuracy: ± 5% of compensation range

• Flow compensation for filter plugging and battery voltage

• Dual flow range easily handles Impingers, cyclones, and tubes

• “Auto-restart” within one minute of a flow fault

• Includes single pack battery and run time could be extended with the use of optional triple pack.

• Battery pack rechargeable while attached or separately

• Compact, rugged, and quiet

• Stainless steel belt clip with built-in tripod connector

• Key pad lock system

• One year warranty

Technical Specifications:

Flow Range: 0.8-5LPM (800-5000 cc/min)

5—799 cc/min With Universal Low Flow Holder

Compensation Range:

5000 cc/min up to 10” water back pressure

4000 cc/min up to 20” water back pressure

3000 cc/min up to 30” water back pressure

2000 cc/min up to 50” water back pressure

1000 cc/min up to 30” water back pressure

800 cc/min up to 15” water back pressure

Accuracy: ± 5% of Compensation Range

Run Time (hrs) at different backpressure and flow rate

(cc/min) Backpressure (inches of water)
Flow Rate	5”	10”	15”	20”	30”	40”	50”
1000	18hr	14 hr	12 hr	10 hr	7 hr
2000	14hr	12 hr	10 hr	8 hr	6 hr	4 hr	3 hr
3000	11 hr	9 hr	8 hr	7 hr	4 hr
4000	9 hr	7 hr	5 hr	3 hr
5000	6 hr

Data Storage Flow rate, elapsed clock time, accumulated

Data Storage	Flow rate, elapsed clock time, accumulated
Display	Backlit LCD with 2 lines of 16 Characters
Normal Operation	Battery Level, Flow Rate, Elapsed Time, Volume Collected, Timer, DP .
Flow Fault Displays	Flow Fault, or Filter Off
Power Supply	Single Pack, NiMH Batteries: 4.8V, 2.15 Ah Triple Pack, NiMH Batteries: 4.8V, 6.45 Ah
Charger Type	Standard Wall Charger
Standard Charger Input Voltage	120 VAC - 240 VAC
**Approvals	UL913 and CAN/CSA-C22.2 Intrinsically safe certified. Suitable for use in Class I, II, III Div 1 Groups A-G,T3 Hazardous locations.
ATEX	Pending
Temperature	Operating 32°F to 113°F (0°C to 45°C) Storage 32°F to 113°F (0°C to 45°C) Charging 50°F to 104°F (10°C to 40°C)
Case	Polycarbonate steel fiber filled, RFI/EMI-shielded
Size	4.5”H x 4”W x 2”D(11.4 cm H x 10.2 cm W x 5 cm D)
Weight	19oz(539g)