Allin-1 Personal Air Sampler Single Pack Kit
Allin-1 Personal Air Sampler  Single Pack Kit Air Sampling Pump Pump, Calibrator & Accessories Industrial Hygiene Selangor, Malaysia, Kuala Lumpur (KL), Klang Supplier, Suppliers, Supply, Supplies | Inter Products Marketing Sdn Bhd

AP Buck / APB-905020

Allin-1 Personal Air Sampler  Single Pack Kit (Flow Rate: 5 to 600 cc/min.)

Allin –1 Single Pack Kit, 230V c/w Allin-1 pump with single pack NiMH battery, standard 230VAC battery charger, Luer hose adapter, shirt/hose clip, 3 feet of vinyl hose, operating manual, adjustable Universal low flow holder for sorbent tube sampling and non adjustable tube holder.

The BUCK Allin series is a personal air sampler suitable for use in location where flammable gases, vapors, dust, fibers or flyings are present. It has steel fiber filled housing for RFI/EMI shielding, exclusive electronic circuit board for constant flow control, an LCD display with 2 lines of 16 characters, a single diaphragm pump mechanism, and a rechargeable NiMH battery pack.

The purpose of this pump is to draw air contaminants in through a sampling media such as sorbent tubes, bubble impingers, long duration color detector tubes; to gauge personnel exposure to gases, vapors, particulates, aerosols, etc.

No tools are required to operate this pump and a password protected keypad locking system provides uninterrupted operation. The main display allows quick selection to RUN (for sampling) or MENU (to reset pumps data).


  • UL 913 and CAN/CSA-C22.2 Intrinsically safe certified: Suitable for use in Class I, II, III, Div 1 Groups A-G, T3 Hazardous locations.
  • High back pressure compensation, up to 36” of w.c.@300cc/min
  • Flow compensation for filter plugging and battery voltage.
  • ''Auto-restart'' within one minute of a flow fault.
  • Includes single pack battery and run time could be extended with the use of option triple pack.
  • Battery pack rechargeable while attached or separately
  • Compact, rugged, and quiet.
  • Stainless steel belt clip with built-in tripod connector.
  • Key pad lock system.

Technical Specifications

Flow Range: 0.1-0.6 LPM (100-600 cc/min) 5 - 99 cc/min With Universal Low Flow Holder

Compensation Range:

600 cc/min up to 10” water back pressure
500 cc/min up to 25” water back pressure
300 cc/min up to 36” water back pressure
200 cc/min up to 25” water back pressure
100 cc/min up to 10” water back pressure
Accuracy: ± 5% of Compensation Range

Run Time (hrs) at different backpressure and flow rate (cc/min) 

  Backpressure (inches of water)
Flow Rate  3'' 5'' 10'' 15'' 20'' 30'' 36''
100 24hr 23hr 21hr        
200 20hr 19hr 18hr 16hr 15hr 14hr  
300 19hr 18hr 16hr 14hr 13hr 11hr 10hr
400 15hr 14hr 12hr 11hr 10hr 9hr  
500 13hr 10hr 9hr 9hr 7hr    
600 8hr 6hr          

Low Flow using Universal Low Flow Holder 5 to 99cc/min 1-8 hours

Data Storage Flow rate, elapsed clock time, accumulated
Allin Plus Only volume, temperature, DP and any Flow Faults are logged in the memory for download to PC
Display Backlit LCD with 2 lines of 16 Characters
Normal Operation Battery Level, Flow Rate, Elapsed Time, Volume Collected, Timer & DP.
Flow Fault Displays Flow Fault, or Filter Off
Power Supply Single Pack, NiMH Batteries: 4.8V, 2.15 Ah
Triple Pack, NiMH Batteries 4.8V, 6.45 Ah
Charger Type Standard Wall Charger
Standard Charger Input Voltage 110 VAC - 240 VAC
Approvals UL913 and CAN/CSA-C22.2 Intrinsically safe certified. Suitable for use in Class I, II, III Div 1Groups A-G,T3 Hazardous locations.
Temperature Operating 32°F to 113°F (0°C to 45°C)
Storage 32°F to 113°F (0°C to 45°C)
Charging 50°F to 104°F (10°C to 40°C)
Case Polycarbonate steel fiber filled, RFI/EMI-shielded
Size 4.5”H x 4”W x 2”D (11.4 cm H x 10.2 cm W x 5 cm D)

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version